One process, many industries
From performance textiles to rigid panels and wrapped profiles, our adhesives and coatings are engineered around the substrate, the process and the end-use requirement.
Textile & non-woven
Membrane, foam and textile-to-textile lamination and functional coating.
Flat lamination & coating
Wood, metal, foil and film to core and panel materials.
Wood & parquet
Panel and flooring lamination with high durability.
Profile wrapping
Decorative film to PVC and aluminium profiles.
Coating, lamination and treatment for technical textiles
A vast variety of flexible substrates can be bonded and finished — textile to textile, textile to membrane, textile to foam. We help you identify the right process for breathable, waterproof and protective constructions, then support trials through to production.
Typical substrates
Rigid and flexible flat lamination
Bond sheet materials such as polyester, PVC, aluminium, steel and compact panel to core materials including XPS, PIR, PUR and mineral boards. Reactive hot-melts suit stressed and difficult surface-tension substrates with high initial bond and clean application.
Typical substrates
Wood and parquet lamination
Panel and flooring lamination benefits from adhesives with high initial bond, fast strength build and very high humidity and heat resistance in the finished product. Grades are selected for good bonding to different wood types and clean, precise application.
Typical substrates
Profile wrapping
Wrap decorative films onto linear profiles for windows, doors and interior trim. The adhesive must flow around complex geometries, wet out low-energy films and hold edges and returns under service conditions.
Typical substrates
Technical & high-performance lamination
For demanding, high-end constructions — protective apparel, workwear and technical composites — we develop laminates that combine high breathability, excellent waterproofness and water repellency, a soft hand and light weight, then validate them with structured testing.
Typical substrates
Process
From application to validated laminate
A representative technical-lamination workflow — the steps we help set up and optimise on your line.
Applying the adhesive
Dot pattern applied on the membrane with total tension control for a uniform, breathable bond.
Winding the laminate
The batch is prepared on an A-frame; the fresh laminate cures before any further layers are added.
Curing
Moisture curing develops full thermoset strength over time under controlled conditions.
Testing
Peel strength, hydrostatic head, breathability, water repellency and flex testing — before and after intensive washing.
Have a substrate or construction in mind?
Describe your laminate and performance targets. We will propose a chemistry and a process to trial.